30 Pack Matte Black Cabinet Pulls - 3.5" Hole Center Kitchen Cabinet Handles & Drawer Pulls for Dresser, Wardrobe, Pantry & Bathroom Storage Organization

So lux for the price!! Very heavy duty!Happy with my buy!!As MANY others have mentioned, I wouldn't even order these without a 4mm tap and a 4mm hex wrench. The second pull I installed needed to be tapped, so I just started tapping every one beforehand from then on to save time.The threaded inserts needed to be tightened on EVERY pull I had. If you don't tighten them with a hex wrench they shift back and forth a few degrees without much torque and it is very annoying.The pulls need to be installed quite tightly to prevent spinning on the cabinet.The problem with all this is it is VERY easy to strip out the threaded insert and ruin the pull. So you have 3 chances to do this - tapping, tightening the insert, installing. I needed 42 pulls, so I ordered 2 bags of 25. I had precisely zero remaining when I was done. For some reason the second bag seemed to be of lower quality, and I stripped out 6 of them. Only 2 on the first bag.Finally, the mounting screws provided don't fit a standard cabinet door. The small screw only gives you about 1/8" to mount with, and the longer screws with notches are way too long. So get properly-sized 4mm screws beforehand, or be prepared to cut the longer screws, which is a pain.Once installed they look nice. I wouldn't say it's a huge step up from our standard round knobs, but it's something different, and you're pretty limited with options if you only have one mounting hole.Had to toss a few during the process because of the cheapnessGreat price for these decorative handles. They work just fine at a fraction of the cost of a big box store.I just spent 11k on a kitchen remodel. Painted my cabinets white These pulls perfectly match my new kitchen faucet. Saved a TON of money on these. Great prices on Amazon!These look good but they strip and come loose after very little use.They are not made of sturdy material, very thin walls.Save yourself some aggravation and buy an M4 tap to clean up the mounting screw hole in the knob. I found about 1/4 of the knobs purchased ( bought a total of 50 ) either needed the insert tightened or needed the mounting screw holes cleaned up using the M4 tap. Although it was a nuisance to clean these up they still remain an Excellent Value